Sharp Aquos LC-32WD1E 운영 매뉴얼 - 페이지 26
{카테고리_이름} Sharp Aquos LC-32WD1E에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos LC-32WD1E 38 페이지. Aquos lcd colour television
Sharp Aquos LC-32WD1E에 대해서도 마찬가지입니다: 운영 매뉴얼 (38 페이지)
페이지 인쇄
DTV menu operations
Child Lock
The Child Lock setting allows specific channels to be
blocked from viewing.
•
Press YELLOW. An "L" will appear next to the
channel name, indicating that the channel is
locked.
NOTE:
•
Press YELLOW again to unlock the channel.
•
This setting indicates what channels to block from
access. However, for the Child Lock setting to be
active, you must first set a PIN. See "Child Lock"
on page 25.
Channel Search
Automatic Search
The Automatic Search setting allows you to auto search
for available channels and radio stations, using the pre-
defined frequency channel list for the country or region.
1
Complete steps 1 to 2 in "Channels" on page 23.
2
Press
/
to select Search, and then press OK.
3
To do an automatic search, press GREEN.
NOTE:
•
Completing an Automatic Search will re-set all
modifications previously made.
•
Only new channels will be displayed. Already
known channels will be not.
•
To change the country or region setting, you must
reset the receiver. See page 25.
•
Press YELLOW to enter a specific frequency to
scan.
Manual Search
The Manual Search menu allows you to manually search
for a channel by frequency. (For example, if you want to
search for a specific channel, but do not want to re-set all
of the channels back to their default settings.)
1
Complete steps 1 to 2 in "Edit" on page 23.
2
Press
/
to select Search, and then press OK.
3
Press YELLOW.
4
Press
/
to select the channel you want to search
and then press GREEN.
Signal Info
The Signal Info setting provides advanced information
about the signal being received for a service.
Installation
To access the Installation menu:
1
Press DTV MENU.
2
Press
/
to select Installation, and then press OK.
If you have a PIN set in Child Lock, enter it now using
0–9. See page 25 for information.
•
The DTV Installation menu displays.
Language
The Language menu allows you to select the language
preference. If a programme contains multiple language
information, you can set your first and second preferences
for audio and subtitles.
1
Repeat steps 1 - 2 in "Installation" on page 24.
2
Press
/
to select Language, and then press OK.
3
Press
/
to select the desired setting, and then
press
/
to change the setting.
Audio 1
Specifies the first language preference
for the audio.
Audio 2
Specifies the second language
preference for the audio.
Subtitles 1
Specifies the first language preference
for the subtitles.
Subtitles 2
Specifies the second language
preference for the subtitles.
NOTE:
•
Additional settings may be available if MHEG
service is available. The options for these settings
depend on the input received from the channel
system.
24