Sharp Aquos LC-32WD1E 운영 매뉴얼 - 페이지 9
{카테고리_이름} Sharp Aquos LC-32WD1E에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos LC-32WD1E 38 페이지. Aquos lcd colour television
Sharp Aquos LC-32WD1E에 대해서도 마찬가지입니다: 운영 매뉴얼 (38 페이지)
페이지 인쇄
Quick start guide
Television rear and side view
(Programme [channel] buttons)
-
+
(
/
) (Volume buttons)
EXT 3 Connections
S-Video input (Y/C)
Composite input (CVBS)
Audio input - Left
Audio input - Right
Headphones (audio out)
The S-Video (Y/C) and composite (CVBS) connection
cannot be used at the same time.
AC Input
Service (D-Sub 9)
Turning on the television
To turn on the TV, press
TV.
NOTE:
•
If the TV is not going to be used for a long period
of time, unplug the power cord from the AC outlet
to remove AC power.
P (
)
/
Antenna input
(DVB-T 5V=/80 mA)
Common
Interface slot
EXT 1*
(SCART input/output)
on the remote control or on the
EXT 4
(Component input)
EXT 2
Audio output
(SCART input/output)
EXT 5 (VGA / Stereo input)
*EXT 1 provides tuner output. Use EXT 1 to connect a decoder or
audiovisual equipment used for recording purposes (ex. VCR).
Standby mode and LED indicator
Press
on the remote control when the TV is on.
•
This will put the TV into standby mode. The image
on the TV will disappear and the
the TV will change from green to red. (See
page 5.)
•
Small amounts of electrical power are being used
when the TV is in standby mode. To completely
remove power from the TV, unplug the power cord
from the AC outlet.
•
There is an active standby mode and a passive
standby mode.
(Input button)
(Standby/On button)
EXT 6 (HDMI input, Stereo input
for DVI-HDMI connections)
EXT 7
(HDMI input)
indicator on
7