Sharp Aquos LC-32WD1S 운영 매뉴얼 - 페이지 20
{카테고리_이름} Sharp Aquos LC-32WD1S에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos LC-32WD1S 38 페이지. Aquos lcd colour television
Sharp Aquos LC-32WD1S에 대해서도 마찬가지입니다: 운영 매뉴얼 (38 페이지)
페이지 인쇄
Menu operations (main)
Input Label
The Input Label setting allows you to customize the label
that is displayed for each input source.
1
Press
to select the input source whose label you
want to change.
2
With the input source selected, press MENU. The TV
Menu displays.
3
Press
/
to select Setup Menu, and then press OK.
4
Press
/
to select Input Label, and then press OK.
5
Use
/ / /
to enter each letter of the new name,
and then press OK.
NOTE:
•
The name can be six characters or less.
•
You cannot change the label if the input source is
TV or DTV.
Position
Menu Operation: C (page 12)
The Position setting adjusts the horizontal and vertical
position of the image on the screen.
V-Pos.
Moves the image up or down.
H-Pos.
Moves the image left or right.
Reset
Resets the settings to the factory
default.
WSS (Wide Screen
Signalling)
Menu Operation: A (page 12)
If the incoming broadcast contains wide screen signals, the
WSS setting allows the TV to automatically switch to the
appropriate screen format.
NOTE:
•
To adjust the wide screen format manually, see
"Wide Mode" on page 20.
Antenna Supply Voltage
Menu Operation: A (page 12)
The Antenna Supply Voltage setting turns power "On" or
"Off" to the antenna input connection on the rear of the
television. (See page 3.)
Clock Menu
Menu Operation: C (page 12)
The Clock Menu setting allows you to set a 12-hour or 24-
hour clock and set the time manually.
NOTE:
Option Menu
TV/DTV/AV only
Input Select
TV/DTV/AV only
Menu Operation: A (page 12)
The TV will automatically detect the type of input for EXT1,
EXT2, or EXT3. However, this can be set manually if
desired. (For example if the image is unclear.)
EXT 1, EXT 2
EXT 3
Audio Only
Menu Operation: A (page 12)
The Audio Only setting turns off video and only plays the
audio from the source.
DNR (Digital Noise
Reduction)
Menu Operation: C (page 12)
The DNR setting (Digital Noise Reduction) produces a
clearer image by reducing digital noise. Available options
are High, Low, and Off.
•
Press
/
to select 12/24 Hours Selection.
Press
/
to set this setting to 12 Hours or 24
Hours.
•
Press
/
to select Set Time. Press 0–9 to enter
the current time.
•
If teletext information is available, the TV will
automatically synchronize with the time included
with the teletext information.
Y/C (S-Video), RGB, CVBS
Y/C (S-Video), CVBS
TV/DTV/AV only
18