Sharp AQUOS LC-37DW99U 추가 서비스 매뉴얼 - 페이지 2
{카테고리_이름} Sharp AQUOS LC-37DW99U에 대한 추가 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AQUOS LC-37DW99U 6 페이지. Sharp lcd color television service manual
페이지 인쇄
LC-37DW99U
LC-37DW99U
OUTLINE AND ADJUSTMENT
[1] Outline
In this Service Manual, only parts in the LCD module are shown. For the other points, refer to the LC-37DW99U (S77L3LC37DW99) Service Manual
and LC-32/37D62U (S17A9LC32D62U) Service Manual.
[2] Adjustment
When replacing the LCD control PCB, follow these steps to adjust VCOM.
1) Enter the adjustment process mode.
2) Select the item [VCOM ADJ] on the page 3/26 using the CH (
3) Press the Enter key to check that the adjustment pattern is displayed.
4) Adjust the flicker in the middle of the screen to minimum using the VOL (+)/(-) keys on the remote controller.
5) Press the Enter key to turn off the pattern.
6) To exit the adjustment process mode after the adjustment is done, unplug the AC cord from the outlet to make a forced shutdown. (When the
power was turned off with the remote controller, once unplug the AC cord and plug it again. In this case, wait 10 seconds or so before plugging.)
CAUTION: Use due care in handling the information described here lest your users should know how to enter the adjustment process mode.
If the settings are tampered in this mode, unrecoverable system damage may result.
Description of display
(1) Current page/
Total pages
1/26
MAIN Version
BOOT Version
Monitor Version
EQ DATA CHECKSUM
TEMPERATURE
LAMP ERROR
NORMAL STANDBY CAUSE
ERROR STANDBY CAUSE
)/(
(3) Current selected input
(2) Current page title
(4) Current color system
[INFO]
INPUT5
AUTO
0.90 ( U 2006/11/21 1A)
D62U B 1.01
0.9
ROM
7B
0
0
1)
0
0H 0M
4)
0
0H 0M
Service Manual
) keys on the remote controller.
(6) LCD Panel size/Speaker type
(5) Destination
USA
37_UNDER
2)
0
3)
0
0H 0M
0H 0M
5)
0
0H 0M
i
(7) Adjustment
process menu
header
(8) Parameters