Sharp AQUOS LC-37GE1E 운영 매뉴얼 - 페이지 19

{카테고리_이름} Sharp AQUOS LC-37GE1E에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AQUOS LC-37GE1E 42 페이지. Lcd colour television

페이지 인쇄

1. Setting the Tv

Menu operations

Miscellaneous

No signal off

When set to "Enable" the TV will automatically enter the

standby mode if there is no signal input for 6 minutes.

TV menu ->Setup

Miscellaneous

No signal off

On-screen displays

Time and date

NOTE

• When a TV programme ﬁ nishes, this function may not

operate.

• This function is not available in DTV mode.

On-screen displays

Here you can determine which on-screen displays are

to be shown by pressing p on the remote control.

Items

On-screen display

Sets the duration of the TV status and station

time

name display.

• This setting also affects other TV screens.

(Volume, Surround, etc.)

Sound mode

Sound mode display on/off ("yes"/"no")

Time

Time information display on/off ("yes"/"no")

Time and date

When you receive teletext, the correct date and time

setting is picked up automatically by the set.

If you do not receive teletext, you should set the "Date"

and "Time" manually. Also you have additional items

you can adjust as outlined below.

NOTE

• Time and date information conﬁ gured manually cannot be

overridden automatically by the set.

• If the power to the set is cut off (disconnection of AC

cord, power outage, etc.), the auto time acquisition mode

through teletext reactivates.

Items

Time

If you receive a station with teletext after

switching on your TV set, the time and date are

automatically registered. In the case of some

stations, the date may have to be entered

manually. For stations without teletext, enter the

time (00:00 to 23:59) and the date (day.month.

year) using the numeric buttons on the remote

control.

Date

See the above item "Time".

Beginning of

Enter the date for the beginning of daylight-

daylight-saving

saving time if it deviates from the date

time

calculated automatically.

End of daylight-

Enter the date of the end of daylight-saving

saving time

time if it deviates from the date calculated

automatically.

Channels

Child lock

Enable

Disable

Description

Geometry menu

You can set the geometry values of the picture such as

picture position and phase relation. The adjustments

are stored independently for each input mode.

TV menu

Geometry

Picture horizontal

Picture vertical

Phase position

Picture horizontal

Sets the horizontal picture position by moving the

picture left and right.

Picture vertical

Sets the vertical picture position by moving the picture

up and down.

Phase position

Adjusting the phase relation ensures a picture without

ﬂ icker and noise. (Available only for RGB signal)

Picture

PC only