Sharp Aquos LC-40LE600S 운영 매뉴얼 - 페이지 17
{카테고리_이름} Sharp Aquos LC-40LE600S에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos LC-40LE600S 36 페이지. Téléviseur couleur à écran
Sharp Aquos LC-40LE600S에 대해서도 마찬가지입니다: 운영 매뉴얼 (5 페이지), (스페인어) 매뉴얼 델 유저리오 (36 페이지), (프랑스어) Mode D'emploi (36 페이지)
페이지 인쇄
Connecting external devices
Audio connections
Speaker/amplifier connection
Connect an amplifier with external speakers as shown below.
E
Connecting an amplifier with digital
audio input
DIGITAL AUDIO IN
Optical audio cable
E
After connecting
Digital audio output setting
After connecting an amplifier with digital audio input and external speakers as shown, you should set an audio
output format compatible with the programme you are watching or the device connected.
Go to "MENU" > "Option" > "Digital Audio Output" > select "PCM" or "Dolby Digital".
NOTE
•
When set to "Dolby Digital", Dolby Digital is output when the Dolby Digital or Dolby Digital Plus audio formats are received. When
set to "PCM", PCM is output no matter what audio formats are received.
Inserting the CA Card into the CI Module
1
Carefully insert the CI Module in
the CI slot with the contact side
forward.
2
The logo on the CI Module must
be facing outward from the rear
of the TV.
E
Connecting an amplifier with
analogue audio input
Audio cable
Checking CI Module information
Go to "MENU" > "Digital Setup" > "CI Menu".
•
The content of this menu depends on the provider of the CI Module.
Module
General information on CI Module displays.
Menu
Adjustment parameters of each CA Card displays.
Enquiry
You can input numerical values such as passwords here.
NOTE
•
Make sure that the CI Module is properly inserted.
R
L
AUX1 IN
R
L
AUX OUT
15