Fiber Tronix FT-FOTR-1V-ST-S 설치 매뉴얼 - 페이지 4

{카테고리_이름} Fiber Tronix FT-FOTR-1V-ST-S에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fiber Tronix FT-FOTR-1V-ST-S 4 페이지. 1-channel digital simplex baseband video transmitter and receiver

페이지 인쇄

Video

Transmitter

4. SPECIAL ATTENTION

a. Only use the power supplies included with these units. The use of other power supplies

may damage the transmitter and/or receiver and void the warranty.

b. The loss of optical fiber should be less than 18 dB. Any loss greater than 18 dB will

compromise the receiver's ability to get the optical signals from the transmitter.

c. Adhere to the equipment's in-door operating temperature and humidity specifications.

Failure to do so may damage the equipment and void the warranty.

5. TROUBLESHOOTING

a. No picture after applying power – (i) check all connectors and cables are securely

connected to the video source, monitor, transmitter and receiver; (ii) ensure all power

supplies are providing the correct voltage and current.

b. No image or poor image quality – determine if the optical signal loss is greater than 18

dB.

c. The picture has ripples – (i) check to see if the camera's power supply is experiencing

AC ripple, if so a filter may be required; (ii) determine if the monitor is faulty; (iii)

determine if other peripheral equipment is causing ripple and if so make the necessary

adjustments.

d. The picture background continuously changes color – a fluorescent lamp's magnetic

field may cause color roll, therefore, reduce the number of fluorescent lamps or

increase the distance between the camera and the lamps.

e. The picture appears smeared – (i) the camera's power supply voltage level may be

unstable, therefore, try another power supply; (ii) ensure the camera and/or monitor

cables are correctly connected and/or the cables are of the correct impedance.

Other interference may require a Fibertronix ground loop isolation filter.

g. Additional troubleshooting assistance can be found on-line at

addition to support from Fibertronix sales engineers at 1-610-429-1511.

v1.0 4/5/11

Transmitter and Receiver Panels

Power

Optical

Input

Link Power

Data Video