DIGISYNTHETIC DSP4800 사용자 설명서 - 페이지 7

{카테고리_이름} DIGISYNTHETIC DSP4800에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DIGISYNTHETIC DSP4800 18 페이지. Integrated dsp power amplifier

OPERATION INSTRUCTION

I: OFF LINE M ODE:

Switch on the power, the system accesses the OFFLINE mode.

A. Adjust the volume: turn CHA/CHB button to adjust the input level of CHA/CHB.

B. Setup the amplifier ID:

Press CHA button for about 3 seconds, the LCD shows as follows:

Then, turn CHA to change the amplifier ID from 1 to 255. Press CHA button again

and save the setting.

C. Load program

Press the CHB button for about 3 seconds, the LCD shows as follows:

Then, turn CHA to select one program(1-11) . Press CHB button again, save the

setting and load the selected program. At the same time, the LCD shows:

LOADING ..........Several seconds later, the LOADING is finished and the system

return the menu

D. SETUP VOLUME PROTECT

Under the menu of LOAD PROGRAM , press the CHB button again for about 3

seconds and then the LCD shows as follows:

Turn the CHB button to switch on/off AUTO MUTE. Then, press the CHB button again

to save the setting.

AUTO MUTE: ON. When the power is on, the volume of CHA/CHB is MUTE

automatically.

AUTO MUTE: OFF. When the power is on, the volume of CHA/CHB comes to the

setting when power was off last time.

NOTE:

1.Among 11 programs, No.11 is not used under the online mode without PEQ,

XOVER and DELAY. The other 10 programs can be saved and recalled on the

online mode.

2. The volume is mute automatically after ever y LOAD PROGRAM.

3. When the system switches from the online mode to the offline, the system can

load the program that is saved under th online mode. At the same time, the

volume is mute automatically.

SET UP AMPLIF IER

DEVICE

NO.#1

LOAD PROGRAM P

NO PEQ+XOVER+DELAY

VOLUME MUTE PROTECT

：

AUTO MUTE ON

I D

Amplifier ID

Program Number

：

Program name