Sharp 19U-M100 서비스 매뉴얼 - 페이지 12

{카테고리_이름} Sharp 19U-M100에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp 19U-M100 35 페이지.

19U-M100,19U-M100S

CU19M10

Vertical-Size, V-Linearity and

V-S Correction Adjustments

1. Receive a good local channel.

2. Enter the service mode DEF category and select the

adjustment "D02" for Vertical Size, "D05" for V-

Linearity and "D06" for V-S Correction Adjustment.

3. Set in order "D05" for V-Linearity, "D06" for V-S

Correction and set the data to get the best linearity.

4. Then adjust "D02" data until it become a proper

vertical size.

Horizontal Position Adjustment

1. Receive a good local channel.

2. Enter the service mode DEF category and select the

adjustment "D01".

3. Adjust "D01" data value to center the picture.

Vertical-Phase Adjustment

1. Receive a good local channel.

2. Enter the service mode DEF category and select the

adjustment "D03".

3. Adjust "D03" bus data to get the most acceptable

vertical position.

Note: The step range is 20 (032) ±10 steps.

Caption Position Adjustment (Horizontal)

1. Receive a good local channel.

2. Enter the service mode DEF category and select the

adjustment "D04".

3. A black text box will appear on the screen. (see

Figure C. below)

4. Adjust "D04" data value to balance the text box

position in the center (A=B).

Figure C.