Sharp 20BM2S 서비스 매뉴얼 - 페이지 3

{카테고리_이름} Sharp 20BM2S에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp 20BM2S 40 페이지.

페이지 인쇄

ADJUSTMENT PRECAUTIONS

This model's setting are adjusted in two different ways: though the I

conventional analog manner. The adjustments via the I

items and variable data.

1. Setting the service mode by the microprocessor.

1 Short JA122 & JA124 for 1 second and release to switch to the service mode position,

and the microprocessor is in input mode. (Adjustment through the I

JWS Key to set as well).

2 Press the CH DOWN / UP key on the remote controller to get ready to select the mode

one by one.

3 Press the CH DOWN / UP key on the remote controller to select the modes reversibly

one by one.

4 Using the VOLUME UP/ DOWN key on the remote controller, the data can be modified.

5 Short JA122 & JA124 for 1 second and release to switch to the normal mode (OFF)

position, and the microprocessor is in out of the service mode.

2. Factory Presetting.

1 Short JA122 & JA124 for 1 second and release to switch to the service mode position

and turn on the main power switch. Initial values are automatically preset, only when a

new EEPROM is used (Judge with the first 4 bytes).

2 The initial data are preset as listed in pages 4, 5 & 6.

3 Make sure the data need modify or not (Initial data).

Note: Once the chassis has been assembly together and ready to be POWER ON for the

FIRST TIME, make sure to short JA122 & JA124 switch to the service mode posi-

tion first and then turn on the main power switch. (See 2- 1 above).

Precaution: If haven't done this initiation, it may possibly generate excessive Beam

current.

3. For reference please check with memory map

(UA1 Series type RH-IX3368CE Attachment)

C bus control and in the

C bus control include preset-only

C bus control). (Use

3-1

Ë SERVICE MODE

(1) In the Service Mode, Key is used to select the mode in the following order.

AGC &

GEOMETRIC

MODE

MISC.

OPTION

MODE

AGC &

GEOMETRIC

MODE

↓

AGC TAKE OVER POINT (AGC)

W.P. RED STD. W.T. (DRI-RS)

↓

VERTICAL SLOPE (V-LIN)

W.P. GREEN STD. W.T. (DRI-GS)

↓

VERTICAL AMP (V-AMP)

W.P.BLUE STD. W.P. (DRI-BS)

↓

VERTICAL SHIFT (V-CENT)

W.P. RED COOL W.P. (DRI-RC)

↓

HORIZONTAL SHIFT (H-CENT)

W.P. GREEN COOL W.P. (DRI-GC)

↓

S-CORRECTION (S-COR)

W.P. BLUE COOL W.P. (DRI-BC)

W.P. RED WARM W.P. (DRI-RW)

W.P. GREEN WARM W.P. (DRI-GW)

W.P. BLUE WARM W.P. (DRI-BW)

FORWARD : CH DOWN KEY

REVERSE : CH UP

KEY

* (

) means OSD display.

WHITE POINT

SUB

ADJ.

MODE

Y-DELAY

ADJ.

MODE

OFFSET

OPTION

ADJ.

MODE

FORWARD : CH DOWN KEY

REVERSE : CH UP

WHITE POINT

SUB

ADJ.

MODE

↓

MAX VOLUME (SUB-VOL)

↓

SUB CONTRAST (SUB-CON)

↓

SUB COLOUR (SUB-COL)

↓

SUB BRIGHTNESS (SUB-BRI)

↓

SUB TINT (SUB-TINT)

↓

SUB SHARPNESS (SUB-SHP)

↓

MAX HOTEL VOLUME (HTL-VOL)

↓

HOTEL PROGRAM NO (HTL-PRG)

↓

OSD GRB REFERENCE (RGB)

↓

BLACK LEVEL OFFSET R (CUT-R)

↓

BLACK LEVEL OFFSET G (CUT-G)

↓

CATHODE DRIVE LEVEL (CDL)

3-2

KEY