Sharp 21HS-50N 서비스 매뉴얼 - 페이지 10

{카테고리_이름} Sharp 21HS-50N에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp 21HS-50N 44 페이지. Pal b/g system colour television

21HS-50N

• Geometry adjustment procedure

To adjust the geometry, follow the procedure outlined below:

1. Tune the set into a Philips test pattern.

2. Enter the service mode as described on page 6.

3. Use the channel up or channel down buttons to enter the desired mode

4. Use the volume buttons to achieve correct setting.

5. When adjustments are complete, use the standby button to turn off the set. The adjustment values will be stored at

this point.

V-LIN

Adjust the vertical linearity control so that the picture centring is as shown in figure 5.

V-AMP

Adjust the vertical amplitude control so that the picture overscans as shown in figure 6.

V-CENT

Adjust the vertical centring control so that the picture is centred as shown in figure 7.

H-CENT

Adjust the horizontal centring control so that the picture is centred as shown in figure 8.

Fig. 5

Fig. 6

Fig. 7

Fig. 8