DIGISYSTEM DSD-100D 사용 설명서 - 페이지 2

{카테고리_이름} DIGISYSTEM DSD-100D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DIGISYSTEM DSD-100D 3 페이지. Dry bath

4.2.4 You will see

finished.

Remark: If you want to interrupt the timer mode, you can press

5. After finishing the work, please press "ON/OFF Button" to turn off the power, and then the "Power

indicator' becomes red.

Remark:

When the "OUT1" indicator on the display screen is sparkling, it means that the instrument is heating.

Caution:

In any of following causes, turn off the power supply and unplug immediately. And contact the distributor

for service.

1. Liquid drops into the instrument.

2. The instrument is dropped or the housing is damaged.

3. The instrument works abnormally, especially generating an abnormal odor or sound.

Maintenance and care:

Keep the instrument clean all the time, so no routine maintenance is required. Cleaning can be done with a

damp cloth. Avoid the use of solvents as they may damage the product housing and inner chamber. The

holes of blocks should be regularly cleaned with a damp cloth to make sure that the test tube will be

contracted with the wall of the holes so as to have good heat conduction. When cleaning the instrument,

the power supply should be unplugged.

Circuit Diagram:

DIGISYSTEM LABORATORY INSTRUMENTS INC.

. Press

and you will see

www.digisystemlab.com

. The setting is

to be continuous mode.

REV.2-2020