DIGISYSTEM VM-2000 사용 설명서

{카테고리_이름} DIGISYSTEM VM-2000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DIGISYSTEM VM-2000 2 페이지.

INSTRUCTION MANUAL FOR VORTEX MIXER VM-2000 & VM-2000-C

Speed controller

Warnings:

* Do not remove the mixer during operation.

* Place the mixer securely away from the edge of bench to avoid the mixer falling off the bench top.

* Do not disassemble the mixer by yourself. In the event of a malfunction, the mixer should be repaired by a

qualified technician. Before repairing, turn off the power.

* Clean up the head once the user finds any liquid on the head, otherwise the head will get damaged easily.

Steps:

1. Place the mixer on a flat and stable bench top. Plug the mixer into a properly grounded outlet which

corresponds with the electrical requirements on the label back on machine.

2. Place the 'Switch' at 'TOUCH' position. The unit will run as soon as touch on the 'Head'. The 'Power

indicator' lights.

3. Place the 'Switch' at the 'AUTO' position, the unit will run automatically.

4. Turn the 'Speed controller' to the required speed.

Warning:

Do not make the motor race rotation to avoid damage. After finishing operation, please place the

switch at 'TOUCH' or 'OFF' position.

Maintenance and care:

Keep the machine clean all the time, so no routine maintenance is required. Cleaning can be done with a

damp cloth. Avoid the use of solvents as they may damage the machine housing.

Circuit Diagram

DIGISYSTEM LABORATORY INSTRUMENTS INC.

VM-2000-C

Head

VM-2000

www.digisystemlab.com

Switch

(AUTO/OFF/TOUCH)

REV.2-2020