Crestron TS-770 빠른 시작 - 페이지 3

{카테고리_이름} Crestron TS-770에 대한 빠른 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Crestron TS-770 4 페이지. Swivel mount kit
Crestron TS-770에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지), 시작하기 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄
Crestron TS-770 빠른 시작
TS-770/1070-SMK
Swivel Mount Kit for TS-70 Series
4. Tighten and adjust the upper 1-14 nut onto the swivel tube to achieve
the desired resistance in the swivel assembly motion.
NOTE:
A flat tool (such as a large flat head screwdriver) can be
placed in the slot on the bottom of the swivel tube to hold the tube in
place while tightening the nut.
5. Tighten the lower 1-14 nut manually to prevent the upper nut from
slipping.
Customize the Swivel Range
Aside from the permanent limiting screw that is attached to the swivel
stop plate, two additional 8-32 x 1/8 in. limiting screws can be attached to
the swivel mount plate to set a custom range for swivel movement.
Limiting Screw Locations in Swivel Stop Plate
Stop Plate with Additional Limiting Screws
Visit the Product Page
Scan the QR code to visit the product page.
TS-770/1070-SMK
www.crestron.com/model/6511519
Quick Start
3