Sharp AQUOS CD-BA250 운영 매뉴얼 - 페이지 7

{카테고리_이름} Sharp AQUOS CD-BA250에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AQUOS CD-BA250 36 페이지. Led backlight tv
Sharp AQUOS CD-BA250에 대해서도 마찬가지입니다: 운영 매뉴얼 (32 페이지), 빠른 매뉴얼 (4 페이지)

페이지 인쇄

Connecting external devices (Continued)

Connecting a USB device

Connect a USB device to the TV.

CAUTION

• Do not disconnect a USB device from the TV while

transferring files, when a screen is in "USB" mode.

NOTE

• The DIGITAL AUDIO OUTPUT terminal usually outputs the same audio from the speakers. (The audio of the content you are

viewing is output from the terminal.)

• The DIGITAL AUDIO OUTPUT terminal does not output some signals, depending on devices and software.

Using a Smartphone with the TV

This function enables you to connect the TV to a smartphone that supports Mobile High-Definition Link (MHL) using an

MHL-compatible cable.

To connect the TV to your MHL-compatible smartphone, be sure to use an MHL-compatible cable (commercially

available).

• You can view pictures and video on a large screen.

• You can play back music files.

NOTE

• An MHL-compatible portable device is required to use this function. Connect the device to the INPUT 3 terminal.

• This production incorporates MHL I.

■ Auto power on

When an MHL-compatible device is connected to the TV, the TV turns on automatically.

• This function operates when "Link operation" is set to "On". (See page 13.)

■ Auto input selection

When an MHL-compatible device is connected while the TV is on, the input mode is selected automatically.

• This function operates when "Link operation" is set to "On". (See page 13.)

■ Operation using the remote control

The remote control of the TV can be used to operate a portable device.

• a/b/c/d, ENTER, 0-9, etc.

• The operations vary depending on the connected equipment and content being viewed.

• Colour (Red/Green/Yellow/Blue) may be available to control play/pause/fast forward/back forward function.

• The illustration used throughout this manual are based on LC-32LE355X.

MHL-compatible cable

Using Digital Audio Output

It is possible to output audio through the DIGITAL AUDIO

OUTPUT terminal. PCM audio outputs from the terminal.

Optical fibre cable

(commercially

available)

To optical digital input of external audio devices

INPUT 3 terminal (Rear side)