Sharp CD DHS1050P 운영 매뉴얼 - 페이지 3

{카테고리_이름} Sharp CD DHS1050P에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD DHS1050P 17 페이지. Mini component system

페이지 인쇄

IMPORTANT SAFETY INSTRUCTIONS (continued)

Additional Safety Information

15) Power Sources - This product should be operated

only from the type of power source indicated on the

marking label. If you are not sure of the type of power

supply to your home, consult your product dealer or

local power company. For product intended to operate

from battery power, or other sources, refer to the

operating instructions.

16) Overloading - Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can

result in a risk of ﬁ re or electric shock.

17) Object and Liquid Entry - Never push objects of any

kind into this product through openings as they may

touch dangerous voltage points or short-out parts that

could result in a ﬁ re or electric shock. Never spill liquid

of any kind on the product.

18) Damage Requiring Service - Unplug this product from

the wall outlet and refer servicing to qualiﬁ ed service

personnel under the following conditions:

When the AC cord or plug is damaged,

If liquid has been spilled, or objects have fallen

into the product,

If the product has been exposed to rain or water,

If the product does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the operating

instructions as an improper adjustment of other

controls may result in damage and will often

require extensive work by a qualiﬁ ed technician

to restore the product to its normal operation,

If the product has been dropped or damaged in

any way, and

When the product exhibits a distinct change in

performance - this indicates a need for service.

19) Replacement Parts - When replacement parts are

required, be sure the service technician has used

replacement parts speciﬁ ed by the manufacturer or

have the same characteristics as the original part.

Unauthorized substitutions may result in ﬁ re, electric

shock, or other hazards.

20) Safety Check - Upon completion of any service or

repairs to this product, ask the service technician to

perform safety checks to determine that the product is

in proper operating condition.

21) Wall or ceiling mounting - When mounting the product

on a wall or ceiling, be sure to install the product

according to the method recommended by the

manufacturer.

22) Power Lines - An outside antenna system should not

be located in the vicinity of overhead power lines or

other electric light or power circuits, or where it can

fall into such power lines or circuits. When installing

an outside antenna system, extreme care should

be taken to keep from touching such power lines or

circuits as contact with them might be fatal.

23) Protective Attachment Plug - The product is equipped

with an attachment plug having overload protection.

This is a safety feature. See Instruction Manual

for replacement or resetting of protective device.

If replacement of the plug is required, be sure the

service technician has used a replacement plug

speciﬁ ed by the manufacturer that has the same

overload protection as the original plug.

24) Stand - Do not place the product on an unstable

cart, stand, tripod or table. Placing the product on an

unstable base can cause the product to fall, resulting

in serious personal injuries as well as damage to the

product. Use only a cart, stand, tripod, bracket or

table recommended by the manufacturer or sold with

the product. When mounting the product on a wall,

be sure to follow the manufacturer's instructions. Use

only the mounting hardware recommended by the

manufacturer.

Precautions

General

Please ensure that the equipment is positioned in a

well ventilated area and ensure that there is at least

4" (10 cm) of free space along the sides, top and back

of the equipment.

4" (10 cm) 4" (10 cm) 4" (10 cm)

Floor

Do not place subwoofer system on the same

surface as the main unit to prevent sound

interruption during playback.

The unit will start the tape initialization when plugged

in to the AC outlet. During this process, initializing

sound will be heard and the unit cannot be turned on.

Wait until the process is ﬁ nished.

Use the unit on a ﬁ rm, level surface free from

vibration.

Place the speakers at least 12" (30 cm) away from

any CRT TV to avoid color variations across the TV

screen. If the variations persist, move the speakers

further away from the TV. LCD TV is not prone to such

variation.

Keep the unit away from direct sunlight, strong magnetic

ﬁ elds, excessive dust, humidity and electronic/electrical

equipment (home computers, facsimiles, etc.) which

generate electrical noise.

Do not place anything on top of the unit.

Do not expose the unit to moisture, to temperatures

higher than 140˚F (60˚C) or to extremely low

temperatures.

If your system does not work properly, disconnect the

AC power cord from the AC outlet. Plug the AC power

cord back in, and then turn on your system.

In case of an electrical storm, unplug the unit for

safety.

Hold the AC power plug by the head when removing

it from the AC outlet, as pulling the cord can damage

internal wires.

The AC power plug is used as a disconnect device and

shall always remain readily operable.

Do not remove the outer cover, as this may result

in electric shock. Refer internal service to your

local SHARP service facility.

This unit should only be used within the range of

41˚F - 95˚F (5˚C - 35˚C).

E-2

MINI COMPONENT SYSTEM

TIMER

CD-DHS1050P

SENSOR

REMOTE

TIMER

ON/ STAND-BY

POWER

OPEN / CLOSE

VOL.

iPod/iPhone

TUNER

(BAND)

TAPE

TUNING

PRESET

AUDIO IN

USB

PLAYBACK (PL AY & STOP)

RECORD/PLAYBACK

PHONES

AUDIO

Table

4" (10 cm)