Sharp CD G14000 운영 매뉴얼 - 페이지 30

{카테고리_이름} Sharp CD G14000에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD G14000 48 페이지. Mini component system

Sharp CD G14000 운영 매뉴얼

Listening to the radio

CD-G14000
POWER
ON/ STAND-BY
TUNER
(BAND)
Auto power on function:
When you press any of the following buttons, the unit turns on.
TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
/
button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, AUDIO IN).
30
5
4
3
2
1
REMOTE
SENSOR
TIMER
POWER
ON/ STAND-BY
OPEN/
c
CLOSE
CD
5
TAPE
(1
2)
4
TUNER
(BAND)
3
PRESET
PRESET
2
AUDIO
IN
1
TUNING
TUNING
VOL.
VOL.
PLAYBACK (PLAY & S TOP)
RECORD/PLAYBACK
PHONES
AUDIO IN
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3
Press the TUNING (
or
station.
Manual tuning:
Press the TUNING (
or
to tune in to the desired station.
Auto tuning:
When the TUNING (
or
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (
again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
FM stereo mode indicator
) button to tune in to the desired
) button as many times as required
) button is pressed for more than 0.5
or
) button
FM stereo receiving indicator