Sharp CD-BA2600H 운영 매뉴얼 - 페이지 19

{카테고리_이름} Sharp CD-BA2600H에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-BA2600H 42 페이지. Mini component system
Sharp CD-BA2600H에 대해서도 마찬가지입니다: 운영 매뉴얼 (5 페이지)

페이지 인쇄

1. Speaker System

Press the / (

) button to start playback.

z Playback will begin from track 1 on the disc you have selected to play. After

that disc finishes playing, the next disc will automatically start playback.

z When the last track on the third disc has finished playing, the CD player will

stop automatically.

z When there is no CD in one of the disc 1 - 3 positions, that position will be

skipped and the next CD will be played.

To interrupt playback:

Press the CD

button on the remote control.

To resume playback from the same point, press the

To stop playback:

Press the

(CD ) button.

To remove the CDs:

Whilst in the stop mode, press the

OPEN/CLOSE button.

The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to

rotate the disc tray and remove the remaining disc.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

Caution:

z Do not place two CDs in one disc tray.

z Do not push the disc tray whilst it is moving.

z Do not turn the disc tray by hand. This may cause malfunctions.

z If the power fails whilst the tray is open, wait until the power is restored.

z If the disc tray is stopped forcibly, "ER-CD10" will appear in the display and the unit

will not function. If this occurs, press the ON/STAND-BY button to enter the power

stand-by mode and then turn the power on again.

z If TV or radio interference occurs during CD operation, move the unit away from

the TV or radio.

z If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.

„ To locate the beginning of a track

To move to the beginning of the next track:

Press the

To restart the track being played:

Press the

Notes:

z You can locate the beginning of a track on a single disc only.

z The

beginning of a track.

button.

„ To locate the desired portion

For audible fast forward:

Press and hold down the

For audible fast reverse:

Press and hold down the

Notes:

z Normal playback will resume when the

button is released.

z You can locate the desired portion on a single disc only.

z When the end of the last track is reached during fast forward, "END" will appear on

the display and CD operation will be paused. When the beginning of the first track

is reached during fast reverse, the unit will enter the playback mode.

z The

desired portion.

PRESET

button for less than 0.5 seconds during playback.

z You can skip to any track by pressing the

PRESET

desired track number appears.

PRESET

button for less than 0.5 seconds during playback.

z You can skip to any track by pressing the

PRESET

sired track number appears.

button on the remote control allows you to locate the

PRESET

button during playback.

PRESET

button during playback.

button on the remote control allows you to locate the

button repeatedly until the

button repeatedly until the de-

PRESET

ENGLISH

E-13