Sharp CD-BA3100 운영 매뉴얼 - 페이지 17

{카테고리_이름} Sharp CD-BA3100에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-BA3100 32 페이지. Cdba3100 operation manual
Sharp CD-BA3100에 대해서도 마찬가지입니다: 빠른 매뉴얼 (4 페이지)

페이지 인쇄

Advanced CD playback (continued)

Press the 0/R

0/R (0 R

0 R) button to start playback.

0/R

0 R

Playback will begin from track 1 on the DISC 1.

After that disc finishes playing, the next disc will automatically start playback.

When the last track on the DISC 6 has finished playing, the CD player will

stop automatically.

When there is no CD in one of the disc tray 1 - 6 positions, that position will

be skipped and the next CD will be played.

To interrupt playback:

Press the CD 6 button on the remote control.

To resume playback from the same point, press the 0 R button.

To stop playback:

Press the

(CD

) button.

To exchange other CDs while playing a disc:

Press CD eject button for any stopped CD from s 1 7 to s 6 7 and exchange discs.

To remove the CDs:

While in the stop mode, press the CD eject button for any CD from s 1 7 to s 6 7

to remove the disc.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

Caution:

Do not place two CDs in one disc tray.

Do not push the disc tray while it is moving.

If the power fails while the tray is open, wait until the power is restored.

If the disc tray is stopped forcibly, "ER-CD10" will appear in the display and the unit

will not function.

If this occurs, press the ON/STAND-BY button to enter the stand-by mode and then

turn the power on again.

If TV or radio interference occurs during CD operation, move the unit away from the

TV or radio.

If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.

*BA3100_P16_17

To locate the beginning of a track

To move to the beginning of the next track:

Press the 2 / 4 button for less than 0.5 seconds during playback.

You can skip to any track by pressing the 2 /

4 button repeatedly until the desired track num-

ber appears.

To restart the track being played:

Press the 3 / 5 button for less than 0.5 seconds during playback.

You can skip to any track by pressing the

3 / 5 button repeatedly until the desired track

number appears.

Note:

You can locate the beginning of a track on a single disc only.

To locate the desired portion

For audible fast forward:

Press and hold down the 2 / 4 button during playback.

For audible fast reverse:

Press and hold down the 3 / 5 button during playback.

Notes:

Normal playback will resume when the 3 / 5 or 2 / 4 button is released.

You can locate the desired portion on a single disc only.

When the end of the last track is reached during fast forward, "DISC END" will

appear on the display and CD operation will be paused. When the beginning of the

first track is reached during fast reverse, the disc will start playback automatically.

00.12.12, 4:41 PM