Sharp CD-BK260V 운영 매뉴얼 - 페이지 39

{카테고리_이름} Sharp CD-BK260V에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-BK260V 50 페이지. Video cd mini system

페이지 인쇄

Recording from the Radio

Before recording:

! When recording important selections, make a preliminary test to ensure that the

desired material is properly recorded.

! SHARP is not liable for damage or loss of your recording arising from malfunction

of this unit.

! The volume and sound controls can be adjusted with no effect on the recorded

signal (Variable Sound Monitor).

! For recording, use only normal tapes. Do not use metal or CrO tapes.

Tune in to the desired station. (See page 32.)

Load a cassette into the TAPE 2 cassette compartment with side A

facing you.

Wind past the leader of the tape, on which recording cannot be performed.

Press the

button to choose one

side or both sides.

... To record on both sides.

... To record on only one side.

Press the REC PAUSE

[

(TAPE)]

button.

Recording will be paused.

Press the

(

/SELECT/RESUME) button to record on side A, or

the

button for side B.

To record on both sides, begin on side A. (If recording is started from side B, the

tape will not switch over to side A.)

To interrupt recording:

Press the REC PAUSE

[

(TAPE)] button.

To resume recording, press the same recording button you pressed in step 5. Other

buttons do not allow resuming.

To stop recording:

Press the

( /RETURN) button.

Note:

If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.

Erase-prevention tab of cassette tapes:

! When recording on a cassette tape, make

sure that the erase-prevention tabs are not re-

moved. Cassettes have removable tabs that

prevent accidental recording or erasing.

! To protect the recorded sound, remove the tab

after recording. Cover the tab hole with adhe-

sive tape to record on the tape without the tab.

Listening to the Radio (See page 32.)

01/4/26

CD-BK260V(S)E4.fm

Side A

Tab of side B

Tab of side A

ENGLISH

E-38