Sharp CD-BK300W 운영 매뉴얼 - 페이지 11

{카테고리_이름} Sharp CD-BK300W에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-BK300W 34 페이지.

„ Setting the FM/AM span selector

The International Telecommunication Union (ITU) has established that member coun-

tries should maintain either a 100 kHz or a 50 kHz interval between broadcasting fre-

quencies of FM stations and 10 kHz or 9 kHz for AM station. The illustration shows

the 50/9 kHz zones (regions 1 and 3), and the 100/10 kHz zone (region 2).

Before using the unit, set the SPAN SELECTOR switch (on the rear panel) to the

interval (span) of your area.

To change the tuning zone:

1 Press the ON/STAND-BY button to enter the stand-by mode.

2 Set the SPAN SELECTOR switch (on the rear panel) as follows.

z For 50 kHz FM interval (9 kHz in AM)

z For 100 kHz FM interval (10 kHz in AM)

3 Whilst pressing down the

button and the X-BASS/DEMO button, press the ON/

STAND-BY button until "CLEAR AL" appears.

Caution:

This operation will erase all data stored in memory including clock, timer settings,

tuner preset, and CD programme.

50/9

100/10

„ Demonstration mode

The first time the unit is plugged, the unit will enter the demonstration mode. You will

see words scroll.

To cancel the demonstration mode:

When the unit is in the power stand-by mode (demonstration mode), press the X-

BASS/DEMO button. The demonstration mode will be cancelled and the display will

disappear.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the X-BASS/DEMO button again.

Note:

When the power is on, the X-BASS/DEMO button can be used to select the extra

bass mode.

„ To change the display brightness (2 levels)

You can switch the display brightness by pressing the DIMMER button.

Dimmed

Brightened

ENGLISH

E-10