Sharp CD-BK300W 운영 매뉴얼 - 페이지 32

{카테고리_이름} Sharp CD-BK300W에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-BK300W 34 페이지.

페이지 인쇄

Troubleshooting Chart (continued)

„ If trouble occurs

When this product is subjected to strong external interference (mechanical shock,

excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is

operated incorrectly, it may malfunction.

If such a problem occurs, do the following:

1 Set the unit to the stand-by mode and turn the power on again.

2 If the unit is not restored in step 1, unplug and plug in the unit, and then turn

the power on.

If neither step 1 nor 2 restores the unit, do the following:

Press the ON/STAND-BY button to enter the power stand-by mode.

Whilst pressing down the

ON/STAND-BY button until "CLEAR AL" appears.

Caution:

This operation will erase all data stored in memory including clock, timer settings,

tuner preset, and CD programme.

„ Before transporting the unit

Press the ON/STAND-BY button to turn the power on.

2 Press the CD button.

Press the

OPEN/CLOSE button to open the disc tray.

Remove all CDs inserted in the unit.

Press the

OPEN/CLOSE button to close the disc tray.

Make sure that "NO DISC" is displayed.

Press the ON/STAND-BY button to enter the stand-by mode, and then unplug

the AC power lead from the AC socket.

E-31

ENGLISH

button and the X-BASS/DEMO button, press the

Maintenance

„ Cleaning the tape-handling parts

z Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean

these parts with a cotton swab moistened with commercial head/pinch roller

cleaner or isopropyl alcohol.

z When cleaning the heads, pinch rollers, etc., unplug the unit which contains high

voltages.

TAPE 1

TAPE 2

Playback head

Capstan

Pinch roller

z After long use, the deck's heads and capstans may become magnetised, causing

poor sound. Demagnetise these parts once every 30 hours of playing/recording

time by using a commercial tape head demagnetiser. Read the demagnetiser's

instructions carefully before use.

„ Cleaning the cabinet

Periodically wipe the cabinet with a soft cloth and a diluted

soap solution, then with a dry cloth.

Caution:

z Do not use chemicals for cleaning (petrol, paint thinner,

etc.). It may damage the cabinet finish.

z Do not apply oil to the inside of the unit. It may cause

malfunctions.

Erase head

Recording/Playback head