Sharp CD-E200H 운영 매뉴얼 - 페이지 33
{카테고리_이름} Sharp CD-E200H에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-E200H 41 페이지. Mini component system
페이지 인쇄
5
Within 30 seconds, press the TUNING/TIME (
to specify the hour to start, then press the MEMORY/SET
button.
The illustrations show the timer playback setting.
6
Within 30 seconds, press the TUNING/TIME (
to specify the minute to start, then press the MEMORY/SET
button.
! Settings are displayed in order and the unit will enter the tim-
er stand-by mode.
! Timer set indicator will light up.
To cancel the timer playback/timer recording:
Press the ON/STAND-BY button to turn the power on.
7
When the preset time is reached, playback or recording will
start.
The volume will increase gradually until it reaches the volume
you were listening to before your system entered the timer
stand-by mode.
8
The unit will enter the stand-by mode one hour after the
timer playback or recording starts.
To reset or change the timer setting:
or
) button
Perform "Timer playback or timer recording" from the beginning.
Note:
When performing timer playback or recording using another unit
connected to the VIDEO/AUX IN sockets, select "VIDEO/AUX" in
step 2.
At this time, only this unit will be turned on or enter the power stand-
by mode automatically. It will enter the power stand-by mode 1 hour
after the playback or recording starts. However, the other unit will
or
) button
not be turned on or off.
03/2/10
CD-E200H(H)E3.fm
CD-E200H
ENGLISH
8
E-26