Sharp CD-E600H 운영 매뉴얼 - 페이지 38
{카테고리_이름} Sharp CD-E600H에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-E600H 41 페이지. Mini component system
페이지 인쇄Maintenance
CD-E600H
ENGLISH
! Cleaning the tape-handling parts
" Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
" When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
TAPE 1
TAPE 2
Playback head
Capstan
Pinch roller
" After long use, the deck's heads and capstans may become mag-
netised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
! Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
" Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
" Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
E-31
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
! General
B
C
A
Power source
Power
consumption
E
B
C
Dimensions
D
Weight
Erase head
( * )This power consumption value is obtained when the demonstra-
Recording/Playback head
tion mode is cancelled in the power stand-by mode. Refer to
page 8 to cancel the demonstration mode.
! Amplifier
Output power
Output terminals
Input terminals
02/12/24
AC 230 V, 50 Hz
Power on: 140 W
Power stand-by: 0.6 W (*)
Width: 270 mm (10-5/8")
Height: 305 mm (12")
Depth: 342 mm (13-1/2")
7.6 kg (16.7 lbs.)
PMPO: 540 W
MPO: 270 W (135 W + 135 W) (DIN 45 324)
RMS: 170 W (85 W + 85 W) (DIN 45 324)
RMS: 120 W (60 W + 60 W) (DIN 45 500)
Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Video/Auxiliary (audio signal): 500 mV/47 k
ohms
CD-E600H(H)E3.fm