Sharp CD-ES222H 운영 매뉴얼 - 페이지 34
{카테고리_이름} Sharp CD-ES222H에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-ES222H 37 페이지. Mini komponenten system
페이지 인쇄
Maintenance
CD-ES222H
ENGLISH
Cleaning the tape-handling parts
Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the unit which
contains high voltages.
TAPE 1
TAPE 2
Playback head
Capstan
Pinch roller
After long use, the deck's heads and capstans may become mag-
netised, causing poor sound. Demagnetise these parts once ev-
ery 30 hours of playing/recording time by using a commercial tape
head demagnetiser. Read the demagnetiser's instructions care-
fully before use.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap so-
lution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
E-27
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product im-
provement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General
B
A
C
Power source
Power
consumption
B
Dimensions
E
D
C
Weight
Erase head
( * )This power consumption value is obtained when the demonstra-
Recording/Playback head
tion mode is cancelled in the power stand-by mode. Refer to
page 8 to cancel the demonstration mode.
Amplifier
Output power
Output terminals
Input terminals
03/10/29
AC 230 V, 50 Hz
Power on: 50 W
Power stand-by: 0.6 W (*)
Width: 270 mm (10-5/8")
Height: 305 mm (12")
Depth: 342 mm (13-1/2")
5.9 kg (13.0 lbs.)
PMPO: 120 W
MPO: 60 W (30 W + 30 W) (DIN 45 324)
RMS: 40 W (20 W + 20 W) (DIN 45 324)
RMS: 30 W (15 W + 15 W) (DIN 45 500)
Speakers: 8 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Video/Auxiliary (audio signal): 500 mV/47 k
ohms
TINSZA002SJZZ
CD-ES222H(H)E.fm