Sharp CD-ES600 운영 매뉴얼 - 페이지 22

{카테고리_이름} Sharp CD-ES600에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-ES600 36 페이지. Sharp mini component system operation manual cd-es600 ,cd-es66

페이지 인쇄
Sharp CD-ES600 운영 매뉴얼
CD-ES600
Listening to the radio (continued)
CD-ES66
! Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1
Perform steps 1 - 3 in "Tuning" on page 21.
2
Press the MEMORY/SET (MEMORY) button to enter the
preset tuning saving mode.
3
Within 30 seconds, press the PRESET (
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 30 seconds, press the MEMORY/SET (MEMORY)
button to store that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorized, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorized will be erased.
Note:
The backup function protects the memorized stations for a few hours
should there be a power failure or the AC power cord disconnection.
22
! To recall a memorized station
Press the PRESET (
lect the desired station.
! To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
1
Press the PRESET (
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Press the PRESET (
tion is located.
or
) button to
! To erase entire preset memory
1
Press the ON/STAND-BY button to enter the stand-by mode.
2
While pressing down the
ton, press the CLOCK/TIMER button until "TUNER CL" appears.
or
) button for less than 0.5 seconds to se-
or
) button for more than 0.5 seconds.
or
) button again when the desired sta-
button and the X-BASS/DEMO but-