Sharp CD-ES600 운영 매뉴얼 - 페이지 33

{카테고리_이름} Sharp CD-ES600에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-ES600 36 페이지. Sharp mini component system operation manual cd-es600 ,cd-es66

페이지 인쇄

! Cassette deck

Symptom

" Cannot record.

" Is the erase-prevention tab re-

" Cannot record tracks with

" Is it a normal tape? (You cannot

proper sound quality.

" Cannot erase completely.

" Sound skipping.

" Is there any slack?

" Is the tape stretched?

" Cannot hear treble.

" Are the capstans, pinch rollers,

" Sound fluctuation.

" Cannot remove the tape.

" If a power failure occurs during

! Remote control

Symptom

" The remote control does

" Is the AC power cord of the unit

not operate.

" Is the battery polarity correct?

" Are the batteries dead?

" Is the distance or angle incor-

" Does the remote control sensor

Possible cause

moved?

record on a metal or CrO tape.)

or heads dirty?

playback, the heads remain en-

gaged with the tape. Do not open

the compartment with great

force.

Possible cause

plugged in?

rect?

receive strong light?

! Tuner

Symptom

" The radio makes unusual

" Is the unit placed near the TV or

noises continuously.

" Is the FM antenna or AM loop an-

! If trouble occurs

When this product is subjected to strong external interference

(mechanical shock, excessive static electricity, abnormal supply

voltage due to lightning, etc.) or if it is operated incorrectly, it may

malfunction.

If such a problem occurs, do the following:

Set the unit to the stand-by mode and turn the power on again.

If the unit is not restored in the previous operation, unplug and

plug in the unit, and then turn the power on.

Note:

If neither operation above restores the unit, clear all the memory by

resetting it.

! Clearing all the memory (reset)

Press the ON/STAND-BY button to enter the power stand-by

mode.

While pressing down the

ton, press the

PRESET

appears.

Caution:

This operation will erase all data stored in memory including clock,

timer settings, tuner preset, and CD program.

Possible cause

computer?

tenna placed properly? Move the

antenna away from the AC power

cord if it's located nearby.

button and the X-BASS/DEMO but-

button until "CLEAR AL"

CD-ES600

CD-ES66