Sharp CD-ES900 운영 매뉴얼 - 페이지 29

{카테고리_이름} Sharp CD-ES900에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-ES900 36 페이지. Sharp operation manual mini component system cd-es900 cp-es900
Sharp CD-ES900에 대해서도 마찬가지입니다: 운영 매뉴얼 (36 페이지)

페이지 인쇄

When the preset time is reached, playback or recording will

start.

The volume will increase gradually until it reaches the preset

volume.

When the timer end time is reached, the system will enter

the power stand-by mode automatically.

Once timer:

The timer will be canceled.

Daily timer:

The timer will operate at the same time every day. It will contin-

ue until the daily timer setting is canceled. Cancel the daily timer

when it is not used.

Note:

When performing timer playback or recording using another unit con-

nected to the GAME INPUT jacks, select "GAME" in step 9.

This unit will turn on or enter the power stand-by mode automatically,

however, the connected unit will not turn on or off.

Checking the timer setting in the timer stand-by mode:

1 Press the CLOCK/TIMER button.

2 Within 10 seconds, press the

"ONCE" or "DAILY", and press the MEMORY/SET button.

3 Within 10 seconds, press the

"ONCE CAL" or "DAILY CAL", and press the MEMORY/SET but-

ton.

The unit returns to the timer stand-by mode after displaying the

settings in order.

Canceling the timer setting in the timer stand-by mode:

1 Press the CLOCK/TIMER button.

2 Within 10 seconds, press the

"ONCE" or "DAILY", and press the MEMORY/SET button.

3 Within 10 seconds, press the

"ONCE OFF" or "DAILY OFF", and press the MEMORY/SET but-

ton.

Timer will be canceled (the setting will not be canceled).

Reusing the memorized timer setting:

The timer setting will be memorized once it is entered. To reuse the

same setting, perform the following operations.

1 Turn the power on and press the CLOCK/TIMER button.

2 Within 10 seconds, press the

"ONCE" or "DAILY", and press the MEMORY/SET button.

3 Within 10 seconds, press the

"ONCE ON" or "DAILY ON", and press the MEMORY/SET button.

4 Press the ON/STAND-BY button to enter the power stand-by

mode.

Note:

The timer can also be set with the remote control.

button to select

CD-ES900

CD-ES99