Sharp CD-G100000 운영 매뉴얼 - 페이지 14
{카테고리_이름} Sharp CD-G100000에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-G100000 47 페이지. Mini component system
페이지 인쇄System connections (continued)
CD-G10000
CP-G10000S
Make sure to unplug the AC power cord of the main unit before
making any connections.
Connecting the subwoofer
Use the subwoofer cable to connect the SUBWOOFER PRE-OUT
jack on the main unit and the SUBWOOFER IN jack on the active
subwoofer.
Main unit
Active subwoofer
14
To subwoofer
output jack
Subwoofer cable
To subwoofer
input jack
AC power connection
After checking all the connections have been made correctly, plug
the AC power cord of this unit into the AC outlet. If you plug in the
unit first, the unit will enter the demonstration mode.
Main unit
AC outlet
(AC 120 V, 60 Hz)
Active subwoofer
AC outlet
(AC 120 V, 60 Hz)
Notes:
The unit will start the tape initialization when plugged in to the AC
outlet. During this process, an initializing sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
Unplug the AC power cord from the AC outlet if the unit will not
be in use for a prolonged period of time.