Sharp CD-SW330H 운영 매뉴얼 - 페이지 28
{카테고리_이름} Sharp CD-SW330H에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-SW330H 48 페이지.
Sharp CD-SW330H에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
Listening to a cassette tape (TAPE 1 or TAPE 2)
CD-SW300H
CD-SW330H
Before playback:
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not
recommended.)
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
28
Tape playback
1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette com-
partment by pushing the
area marked " ".
3
Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment with
the side to be played
facing towards you.
4
Press the TAPE (1
2) button to select the cassette you
want to listen to.
5
Press the
/
(TAPE
button to start playback.
Auto power on function:
When you press any of the following buttons, the unit turns on.
TAPE button (main unit and remote control): The unit turns on and
the "TAPE" function is activated.
TAPE
button on the remote control: The unit turns on and play-
back starts (regardless of the last function).
/
button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, GAME/VIDEO).
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
TAPE 1
TAPE 2
)
Tape play indicator