Sharp XL-MP150 운영 매뉴얼 - 페이지 26

{카테고리_이름} Sharp XL-MP150에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp XL-MP150 42 페이지. Micro component system
Sharp XL-MP150에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 운영 매뉴얼 (42 페이지)

페이지 인쇄
Sharp XL-MP150 운영 매뉴얼

Listening to the radio

XL-MP150
Auto power on function:
When you press any of the following buttons, the unit turns on.
TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
/
button on the main unit: The unit turns on and playback of
the last function starts (CD,TAPE,TUNER,VIDEO/AUX).
26
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3
Press the TUNING (
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
X-BASS (SURROUND)
/DEMO
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop auto-
matically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
or
) button to tune in to the desired
FM stereo mode indicator
FM stereo receiving indicator