Sharp XL-S10 서비스 매뉴얼 - 페이지 5
{카테고리_이름} Sharp XL-S10에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp XL-S10 44 페이지. Sharp deck operation manual xl-s10
Sharp XL-S10에 대해서도 마찬가지입니다: 운영 매뉴얼 (31 페이지)
페이지 인쇄
[2] TEST MODE
Test Mode Key Operation
KEY1
KEY2
Memory
Preset Down
Memory
Stop
Memory
Play
Memory
Preset up
Memory
Clear
Bass/treble
Preset down
Bass/treble
Play
Bass/treble
Clear
All test modes can be terminated by turning off the power with POWER key.
•
Preset clear test
All tuner preset stations are cleared.
•
Preset set test
CH
BAND
1
FM STEREO
FM 87.50 MHz
2
FM 108.00 MHz
3
FM 98.00 MHz
4
FM 90.00 MHz
5
FM 106.00 MHz
6
AM
AM 530 kHz
7
AM 1720 kHz
8
AM 990 kHz
9
AM 600 kHz
Stations are set according to destination.
•
Display test
When test mode is activated, the entire display lights up. As the "PLAY" button is pressed, half of the display lights up alternately.
•
CD test
[cd step 1] Enter test mode.
↓ Hold down the "memory" button
[cd step 2] After some steps, the laser turns on.
↓ Hold down the "memory" button
[cd step 3] After some steps, focus search is performed.
↓ Hold down the "memory" button
[cd step 4] After some steps, CLV rotation is performed.
↓ Hold down the "memory" button
[cd step 5] CD playback starts.
↓ Hold down the "stop" button to return to [cd step 1] ––––––––––
In step 5, hold down the AUX button on the remote control. The tracking servo is switched on/off.
From step 3, the pick up can be moved with the FF/REW button.
•
Soft reset test
All data in RAM is cleared.
•
VOLUME test
Starting from level 23 (default), check all the levels (0 - 23 - MAX).
•
TIMER test
Start the timer at 1:00. When it reaches 1:05, turn on the power with the AUX function and turn off the power after about 30 seconds.
(In the test mode, fade-in and fade-out are not required.)
•
ALL KEY test
In the test mode, hold down all the buttons on the main unit and then press the "POWER" button. "OK" appears.
If only the "POWER" key is pressed, "ERROR" appears.
KEY3
TEST CONTENTS
Power
Preset clear
Power
Preset set
Power
Power
Power
Soft reset
Power
Power
Timer test
Power
FREQUENCY
←———————
INDICATION
Display
CD
Volume
all key
September 12 Days Indication Change
CH
BAND
10
AM
11
·
·
35
36
FM MONO
37
38
39
40
2 – 2
Tu CL
FM P-01
T-1
CL
T-3
T-4
T-6
FREQUENCY
AM 1400 kHz
——————
FM 106.0 MHz
FM 90.0 MHz
FM 98.0 MHz
FM 108.0 MHz
FM 87.5 MHz
XL-S10