Sharp XL-T300H 운영 매뉴얼 - 페이지 29
{카테고리_이름} Sharp XL-T300H에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp XL-T300H 46 페이지. Compact audio system
Sharp XL-T300H에 대해서도 마찬가지입니다: 빠른 매뉴얼 (4 페이지)
![Sharp XL-T300H 운영 매뉴얼](/uploads/products/server2/5047641/5047641.jpg)
„ To recall stations in memory
To specify programmed types and select stations (PTY search):
You can search a station by specifying the programme type (news,
sports, traffic programme, etc. ... see page 20) from the stations in
memory.
1
Press the TUNER (BAND) button to select "FM".
2
Press the PTY.TI button.
"PTY TI" will flash for about 4 seconds.
3
Within 4 seconds, press the PRESET (
select the programme type.
Each time the button is pressed, the programme type will ap-
pear. If the button is held down for more than 0.5 seconds, the
programme type will appear continuously.
4
Whilst the selected programme type is flashing (within
4 seconds), press the PTY.TI button again.
After the selected programme type has been lit for 2 seconds,
"SEARCH" will appear, and the search operation will start.
Notes:
z If the display has stopped flashing, start again from step 2. If the
unit finds a desired programme type, the corresponding channel
number will flash for about 4 seconds which the station name will
flash for 7 seconds which will remain lit.
z If you want to listen to the same programme type of another sta-
tion, press the PTY.TI button whilst the channel number or station
name is flashing. The unit will look for the next station.
z If no station can be found, "NOT FOUND" will appear for 4 sec-
onds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 3, "TP" will appear.
(This does not mean that you can listen to the traffic information at
that time.)
When a traffic information is broadcast, "TA" will appear.
or
) button to
To specify station names and select stations manually:
You can select a station by specifying the name (BBC R1, BBC R2,
etc.) from the stations stored in memory.
Before starting this operation, you must store one or more station
names in memory.
1
Press the TUNER (BAND) button to select the FM band.
2 Press the PRESET (
3
The station name will be displayed for 3 seconds. Then the dis-
play will change.
02/1/29
ENGLISH
or
) button to select a desired station.
e3.fm
XL-T300H
E-23