Sharp XL-UR27H 유형 매뉴얼 - 페이지 34
{카테고리_이름} Sharp XL-UR27H에 대한 유형 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp XL-UR27H 38 페이지. Micro component system
Sharp XL-UR27H에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
Enhancing your system
The connection lead is not included. Purchase a commercially
available lead as shown below.
Portable audio player, etc.
Audio cable
(not supplied)
Auto power on function:
When you press any of the following buttons, the unit turns on.
AUDIO IN button (remote control): The unit turns on and the
"AUDIO IN" function is activated.
/
or FUNCTION button on the main unit: The unit turns on and
playback of the last function starts (CD,TUNER,USB,AUDIO IN).
Listening to the playback sounds of portable
audio player, etc.
1
Use a connection lead to connect the portable audio player
etc. to the AUDIO IN socket.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the AUDIO IN button.
4
Play the connected equipment.
If volume level of the connected device is too high, sound
XL-UR27
distortion may occur. Should this happen, lower the volume of
the connected device.
If volume level is too low, increase the volume of the connected
device.
Note:
To prevent noise interference, place the unit away from the
television.
Headphones
Do not turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from earphones and
headphones can cause hearing loss.
Before plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging
in
the
automatically. Adjust the volume using the VOLUME control.
headphones
disconnects
the
XL-UR27H
ENGLISH
speakers
E-34