Sharp Advanced MXM465N 빠른 시작 매뉴얼 - 페이지 17
{카테고리_이름} Sharp Advanced MXM465N에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Advanced MXM465N 28 페이지. Digital multifunctional system
Sharp Advanced MXM465N에 대해서도 마찬가지입니다: 사양 (8 페이지), 빠른 매뉴얼 (8 페이지), 사양 (8 페이지), 빠른 시작 매뉴얼 (28 페이지)
MAINTENANCE
Replacing a toner cartridge
When toner is running low, the message "Toner Low (Do not replace cartridge until requested)" appears.
When this message appears, prepare a toner cartridge for replacement.
When the amount of toner decreases further, the message "Ready to scan for copy. (Change the toner
cartridge.)" appears. When this message appears, replace the toner cartridge.
When the toner runs out, printing is stopped and the message "Change the toner cartridge." appears.
Old toner cartridge
1
2
Open
Gently pull straight
out with both
hands
• Do not dispose of used toner cartridges. Place them in a plastic bag and keep them. The technician will collect the used toner cartridges when performing maintenance.
• To view the approximate amount of toner remaining, continually touch the [Home Screen] key during printing or when the machine is idle. The percentage of toner remaining will
appear in the display while the key is touched.
• Depending on your conditions of use, the image may become faint or the image blurred.
Removing misfeeds
When a paper misfeed occurs, the message "A misfeed has occurred." will appear in the touch
panel and printing and scanning will stop.
In this event, touch the [Check how to remove misfeeds] key in the touch panel.
When the key is touched, instructions for removing the misfeed will appear. Follow the
instructions. When the misfeed is cleared, the message will automatically clear.
New toner cartridge
3
4
Shake 5 or 6 times Gently insert straight into the machine
until it locks
5
6
Close
17
Caution
• Do not throw toner cartridges into a fire.
Toner may fly and cause burns.
• Store toner cartridges out of the reach of
small children.
• Store the toner in a location that is cooler
than 40°C (104°F). Storage in a hot location
may cause the toner in the cartridge to
solidify.
• Always store toner cartridges on their sides.
If toner cartridges are stored on end, the
toner may harden and become unusable.
• Please use SHARP-recommended toner
cartridges. If toner cartridges other than
SHARP-recommended toner cartridges are
used, the machine may not attain full quality
and performance and there is a risk of
damage to the machine.
Caution
• The fusing unit and the output unit are hot.
• Take care not to touch the fusing unit when
removing a misfeed.
• There is a risk of burning.