Sharp Advanced MXM565N 빠른 시작 매뉴얼 - 페이지 11
{카테고리_이름} Sharp Advanced MXM565N에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Advanced MXM565N 28 페이지. Digital multifunctional system
Sharp Advanced MXM565N에 대해서도 마찬가지입니다: 사양 (8 페이지), 빠른 매뉴얼 (8 페이지), 사양 (8 페이지), 빠른 시작 매뉴얼 (28 페이지)
페이지 인쇄
Do not look directly at the light source.
Doing so may damage your eyes.
Do not block the ventilation ports on the machine. Do not install the machine in a location that
will block the ventilation ports.
Blocking the ventilation ports will cause heat to build up in the machine, creating a risk of fire.
The machine includes the document filing function, which stores document image data on the machine's hard drive. Stored documents can be called up and printed or transmitted as needed. If a hard drive failure occurs, it will no longer be
possible to call up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the originals of important documents or store the original data elsewhere.
With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the loss of stored document data.
Laser information
MX-M365N
790 nm ± 10 nm
Wave length
MX-M465N/MX-M565N
792 nm + 8 nm / -12 nm
MX-M365N
Normal paper mode / Heavy paper mode (P/S = 175 mm/s) =
4.49 μs ± 0.014 μs / 7 mm
MX-M465N
Pulse times
Normal paper mode (P/S = 225 mm/s) = 6.98 μs ± 0.022 μs / 7 mm
MX-M565N
Normal paper mode (P/S = 255 mm/s) = 6.16 μs ± 0.019 μs / 7 mm
MX-M465N / MX-M565N
Heavy paper mode (P/S = 175 mm/s) = 8.98 μs ± 0.028 μs / 7 mm
MX-M365N
Max 1.0 mW (LD1+LD2)
Output power
MX-M465N / MX-M565N
Max 1.0 mW (LD1+LD2+LD3+LD4)
CAUTION
The fusing unit and paper exit area are hot. When removing a
misfeed, do not touch the fusing unit and paper exit area. Take care
not to burn yourself.
When loading paper, removing a misfeed, performing
maintenance, closing the front and side covers, and
inserting and removing trays, take care that your fingers
are not pinched.
Caution
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 2-2007)
11