Sharp AL-1035-WH A 수동 시작 - 페이지 5

{카테고리_이름} Sharp AL-1035-WH A에 대한 수동 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AL-1035-WH A 28 페이지. Digital multifunctional system
Sharp AL-1035-WH A에 대해서도 마찬가지입니다: 운영 매뉴얼 (50 페이지)

페이지 인쇄

FUNCTIONS INTRODUCTION

Operation panel

Toner cartridge replace-

ment required indicator

Drum cartridge replace-

ment required indicator

Misfeed indicator

Density indicator

Density key

ID MODE

5.5×8.5

8.5×11

5.5×8.5

Mode select key

LED indicator

Copy Count key

Photo mode key

Clear key

SCAN to USB key

Copy Start key

Note: • If the "Toner cartridge replacement required"

indicator ( ) is steadily on.

• If the copies show white lines, lighter-colored

printing or fogged image.

It indicates that the toner cartridge is running out

of toner, please replace it with a new cartridge.

CONNECTORS AND

SWITCHES

(1)

(2)

(3)

(4)

(1) USB Connector (A type)

(2) USB Connector (B type)

(3) Power Line Connector

(4) Power Switch

1. Please take out the CD-ROM that

accompany the machine to install the driver.

(For the detailed installation steps, see the

Operation Guide in CD-ROM.)

2. Be sure to complete the driver installation,

and then connect the machine and computer

with the USB cable.

3. Conﬁ gure print settings on the computer and

print.

The scan function consists of two modes:

1. SCAN to USB

(1) Connect the USB memory to

the USB connector (A type) of

the machine as shown in the

diagram on the left.

(2) Place the original on the

document glass.

(3) Select scan settings on the operation panel.

(4) Press the [SCAN to USB] key to start

scanning.

Note:

The USB memory can only be removed when the

•

LED indicator of the machine has stopped rotating il-

lumination, which indicates that the data transmission

has been completed.

The date of the ﬁ le created by Scan to USB is ﬁ xed to

•

be 01/01/2011 0:00:00.

2. PC Scan

Please ensure that the scan driver is installed

and the machine is correctly connected to the

computer.

Note: For the detailed steps of the scan function, please refer

to the Operation Guide (in the companion CD-ROM of the

machine).

SCAN

EN3