Sharp AL-1540CS 온라인 매뉴얼 - 페이지 23
{카테고리_이름} Sharp AL-1540CS에 대한 온라인 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AL-1540CS 37 페이지. Sharp al-1530cs: user guide
Sharp AL-1540CS에 대해서도 마찬가지입니다: 서비스 매뉴얼 (6 페이지)
3
Outline of Button Manager
Button Manager is a utility software to link scanning functions to the SCANNER key on the unit. This software enables
you to set scanning functions to six different scan menus, which will be linked the SCANNER key on the unit.
Reference:
To begin scanning using the unit's operation panel, settings must be established in the Control Panel after the Button Manager is
installed. For information on installing the Button Manager, establishing the Control Panel settings, and scanning using the unit's
operation panel, see "USING THE SCANNER MODE" in the Operation Manual.
The functions of Button Manager are shown below.
Tab
Click to set scan menu
options.
"Scan Setup" area
Set the scan conditions.
Some applications
may limit your choice
Note
of settings.
"OK" button
Click to save your settings,
and exit the dialog box.
"Cancel" button
Click this button to exit the
dialog box without making
any changes to the
settings.
You can specify and change your six scan menu options from five functions. Refer to
and change the scan menu options.
Close the source application before using the SCANNER key on
the unit.
Note
"Application Selection" area
Select the start-up application
here.
Show TWAIN setting screen
when scanning
You can select whether or not the
TWAIN screen is shown. When
the checkbox is selected, the
TWAIN screen appears when
scanning is executed to let you
adjust the scanning conditions.
"Help" button
Click this button to display the
help file for Button Manager.
"Apply" button
Click to save your settings without
closing the dialog box.
Button Manager Settings
CONTENTS
INDEX
to specify
21