Sharp AL-1633 소프트웨어 설정 매뉴얼 - 페이지 14

{카테고리_이름} Sharp AL-1633에 대한 소프트웨어 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AL-1633 20 페이지. Digital multifunctional system
Sharp AL-1633에 대해서도 마찬가지입니다: 온라인 매뉴얼 (32 페이지)

페이지 인쇄

SETTING UP BUTTON MANAGER

Button Manager is a software program that works with the scanner driver to enable scanning from the operation

panel of the machine.

To scan using the operation panel of the machine, Button Manager must be linked with the scan menu keys on the

machine. Follow the steps below to link Button Manager to scanner events.

Windows XP

Click the "start" button, click "Control

Panel", click "Printers and Other

Hardware", and then click "Scanners

and Cameras".

Click the "SHARP AL-XXXX" icon and

select "Properties" from the "File"

menu.

In the "Properties" screen, click the

"Events" tab.

Select "ScanMenu SC1" from the

"Select an event" pull-down menu.

Select "Start this program" and then

select "Sharp Button Manager D" from

the pull-down menu.

Click the "Apply" button.

Repeat Steps 4 through 6 to link

Button Manager to "ScanMenu SC2"

through "ScanMenu SC6".

Select "ScanMenu SC2" from the "Select an

event" pull-down menu. Select "Start this

program", select "Sharp Button Manager D" from

the pull-down menu, and then click the "Apply"

button. Do the same for each ScanMenu through

"ScanMenu SC6".

When the settings have been completed, click the

"OK" button to close the screen.

Button Manager is now linked to the scan menu keys

(1 through 6).

The scan settings for each of scan menu keys 1

through 6 can be changed in the setting window of

Button Manager.

For the factory default settings of the scan menu keys,

see "USING THE SCANNER MODE" in the Operation

Manual. For the procedures for configuring Button

Manager settings, see "Button Manager Settings" in

the Online Manual.