Sharp AL-1644 소프트웨어 설정 매뉴얼 - 페이지 18
{카테고리_이름} Sharp AL-1644에 대한 소프트웨어 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AL-1644 20 페이지. Digital multifunctional system
Sharp AL-1644에 대해서도 마찬가지입니다: 온라인 매뉴얼 (32 페이지)
페이지 인쇄
TROUBLESHOOTING
The MFP driver cannot be correctly
installed by Plug and Play (Windows
2000/XP)
In Windows 2000/XP, if the MFP driver cannot be
correctly installed by Plug and Play (for example, Plug
and Play takes place without copying the required files
for the MFP driver installation), follow these steps to
remove unneeded devices and then install the MFP
driver as explained in "INSTALLING THE
SOFTWARE" (p. 4).
1
Click the "start" button, click "Control
Panel", and then click "Performance
and Maintenance".
In Windows 2000, click the "Start" button, select
"Settings", and then click "Control Panel".
2
Click "System", click the "Hardware"
tab, and click the "Device Manager"
button.
In Windows 2000, double-click the "System"
Note
icon, click the "Hardware" tab, and click the
"Device Manager" button.
3
Click the
icon beside "Other
devices".
If "AL-XXXX" and "SHARP AL-XXXX" appear,
select and delete both of these items.
If "Other devices" does not appear, close the
Note
"Device Manager" window.
4
Install the software as explained in
"INSTALLING THE SOFTWARE".
16
Another printer is using the parallel
port (when using a parallel cable)
If another printer is using the parallel port and printing
is not possible using the machine, follow the steps
below to change the port setting of the other printer
driver, and make sure that the port of the printer driver
for the machine is set to LPT1.
1
Click the "start" button, click "Control
Panel", click "Printers and Other
Hardware", and then click "Printers
and Faxes".
In Windows 95/98/Me/NT 4.0/2000, click the
"Start" button, select "Settings", and then click
"Printers".
2
Click the icon of the printer driver for
which you wish to change the port
setting, and select "Properties" from
the "File" menu.
3
Click the "Ports" tab.
In Windows 95/98/Me, click the "Details" tab.
4
Select "FILE:" in the "Print to the
following port" list box, and click the
"OK" button.
5
Click the "SHARP AL-XXXX" printer
driver icon and select "Properties"
from the "File" menu.
6
Click the "Ports" tab.
In Windows 95/98/Me, click the "Details" tab.
7
Select "LPT1" in the "Print to the
following port" list box, and click the
"OK" button.
In the event that you need to use the other
Note
printer, repeat the above steps to set the port
of the machine to "FILE:", and change the
port setting of the other printer back to
"LPT1".