Sharp AL-841 운영 매뉴얼 - 페이지 23
{카테고리_이름} Sharp AL-841에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AL-841 32 페이지. Digital laser multifunction
페이지 인쇄
Problem
Possible cause
The machine
The interface cable might
prints wrong
not be connected properly.
data or
The interface cable is not
incorrect
IEEE-1284 compliant or a
characters.
switch box / pass-through
device does not respond to
high speed data transfer.
If using Windows 3.1x, Print
Printing is
Manager may be disabled.
too slow.
There may be too many
applications open.
The resolution is set to
600dpi.
The computer may have
insufficient random-access
memory (RAM).
The machine
The page layout is too
does not
complex.
print the full
Resolution is set to 600dpi.
image.
Page orientation setting may
be incorrect.
There may be too many
applications open.
The paper in the machine
may be larger than the
paper size specified in your
application or printer driver.
The interface cable is not
IEEE-1284 compliant or a
switch box / pass-through
device does not respond to
high speed data transfer.
The CPU specifications may
be incorrect.
The computer may have
insufficient random-access
memory (RAM).
The machine
The interface cable might
not be connected properly.
does not
scan.
*1 See the section on LOADING COPY PAPER.
*2 See the section on TD CARTRIDGE REPLACEMENT.
*3 See the section on DRUM CARTRIDGE REPLACEMENT.
Solution
Check the interface cable
connection.
Use the interface cable included with
the AL-841. Remove any switch box /
pass-through device connected
between the computer and the AL-
841. See the parallel interface
specifications.
Double-click the Printers icon in
Control Panel and check the Use
Print Manager box.
Close all unnecessary applications
before printing.
Set the resolution to 300dpi.
Install more random-access memory
(RAM) in your computer.
Simplify the page layout.
Set resolution to 300dpi.
Change the page orientation with the
printer driver.
Close all unnecessary applications
before printing.
Load the correct paper into the
machine.
Use the interface cable included with
the AL-841. Remove any switch box /
pass-through device connected
between the computer and the AL-
841. See the parallel interface
specifications.
Check that the CPU of your
computer is 486DX 66MHz or better.
Install more random-access memory
(RAM) in your computer.
Check the interface connection.
TROUBLESHOOTING
See
page:
4
4, 26
–
–
14
5
–
14
14
–
–
4, 26
5
5
4
4
21