Sharp AR M277 - B/W Laser - Copier 소프트웨어 설정 매뉴얼 - 페이지 5
{카테고리_이름} Sharp AR M277 - B/W Laser - Copier에 대한 소프트웨어 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR M277 - B/W Laser - Copier 18 페이지. Digital multifunctional system
Sharp AR M277 - B/W Laser - Copier에 대해서도 마찬가지입니다: 온라인 매뉴얼 (36 페이지)
![Sharp AR M277 - B/W Laser - Copier 소프트웨어 설정 매뉴얼](/uploads/products/server2/5048186/5048186.jpg)
INSTALLING THE SOFTWARE
If an error message appears, follow the on-screen instructions to solve the problem. After the
Note
problem is solved, the installation procedure will continue. Depending on the problem, you may
have to click the "Cancel" button to exit the installer. In this case, reinstall the software from the
beginning after solving the problem.
INSTALLATION IN WINDOWS XP (USB/PARALLEL
CABLE)
1
The USB or parallel cable must not be
connected to the machine. Make sure
that the cable is not connected before
proceeding.
If the cable is connected, a Plug and Play
window will appear. If this happens, click the
"Cancel" button to close the window and
disconnect the cable.
The cable will be connected in step
Note
12.
2
Insert the CD-ROM into your computer's
CD-ROM drive.
3
Click the "start" button, click "My
Computer" (
the CD-ROM icon (
4
Double-click the "setup" icon (
If the language selection screen
Note
appears after you double click the
"setup" icon, select the language that
you wish to use and click the "Next"
button. (Normally the correct language
is selected automatically.)
5
The License Agreement window will
appear. Make sure that you understand
the contents of the license agreement,
and then click the "Yes" button.
6
Read the message in the "Welcome"
window and then click the "Next" button.
), and then double-click
).
).
7
Select the checkboxes of the software
packages to be installed and then click
the "Next" button.
Click the "Display README" button to show
information on packages that are selected.
The PC-FAX driver can only be used if
Note
the facsimile expansion kit is installed.
8
Check the packages on the screen, and
then click the "Start" button.
The software packages to be installed will
be displayed on the screen. If an incorrect
package is displayed, click the "Back"
button and select the correct packages.
3