Sharp AR-203E X 주의 사항 리플렛 - 페이지 4

{카테고리_이름} Sharp AR-203E X에 대한 주의 사항 리플렛을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-203E X 37 페이지. Digital multifunctional system
Sharp AR-203E X에 대해서도 마찬가지입니다: 프린터 사용 설명서 (44 페이지), 온라인 매뉴얼 (39 페이지)

페이지 인쇄

ENGLISH

CAUTIONS

Caution label on the machine

The label (

: Caution, risk of danger

: Caution, hot surface

Cautions on using the machine

Warning:

• The fusing area is hot. Exercise care in this area when removing misfed paper.

• Do not look directly at the light source. Doing so may damage your eyes.

• Do not switch the machine rapidly on and off. After turning the machine off, wait 10

to 15 seconds before turning it back on.

• Machine power must be turned off before installing any supplies.

Caution:

• Place the machine on a firm, level surface.

• Do not install the machine in a humid or dusty location.

• When the machine is not used for a long time, for example for consecutive

holidays, turn the power switch off and remove the power cord from the outlet.

• When moving the machine, be sure to turn the power switch off and remove the

power cord from the outlet.

• Do not cover the machine with a dust cover, cloth or plastic film while the power is

on. Doing so may prevent heat radiation, damaging the machine.

• Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous radiation exposure.

Important points when selecting an installation site

Do not install your machine in areas that are:

• damp, humid, or very dusty

• exposed to direct sunlight

• poorly ventilated

• subject to extreme temperature or humidity changes, e.g., near an air conditioner

or heater.

Be sure to allow the required space around the

machine for servicing and proper ventilation.

) in the fusing area of the machine indicates the following:

20 cm

10 cm