Sharp AR-5127 프린터 사용 설명서 - 페이지 23

{카테고리_이름} Sharp AR-5127에 대한 프린터 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-5127 39 페이지.
Sharp AR-5127에 대해서도 마찬가지입니다: 운영 매뉴얼 (17 페이지)

NOTICE PAGE PRINTED

If you find that a notice page has been printed at the end

of a print job, the print data received from the computer

has not been printed as specified. Fix the problem as

explained below and then try printing again.

If a NOTICE PAGE is printed

If the following NOTICE PAGE is printed, check your

settings for the Staple function.

****************************************************

Notice Page

****************************************************

The IMC memory full error had occurred,

a normal output was not able to be executed.

Please refer to the operation manual for

the solution method.

When the Staple function is selected:

Either set the print quality to 'Draft', or select a larger

number for "MEM. FOR PRINTER" in the "COPY" -

"FUNCTION SETTING" key operator program. If this

still does not solve the problem, increase the IMC

memory.

CONTENTS

When the Staple function is not selected:

Turn off the ROPM function setting. If you wish to use

the ROPM function, set the print quality to 'Draft' or

increase memory.

NOTE:

The IMC memory is used to store print data when the

ROPM function is used. This memory is also used to

store original image data in the copy mode. The

percentage of the memory used for the printer feature

can be adjusted using a copier key operator program.

See the key operator's guide in the operation manual.

The memory can be extended by adding commercially

available memory modules. For details, contact your

SHARP dealer.

Disabling notice page printing

Notice page printing can be disabled using a key

operator program.

INDEX

TOP OF CHAPTER

KEY OPERATOR PROGRAMS

TROUBLESHOOTING