Sharp AR-5320 소프트웨어 설정 매뉴얼 - 페이지 11

{카테고리_이름} Sharp AR-5320에 대한 소프트웨어 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-5320 16 페이지. Mono laser copier/printer
Sharp AR-5320에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 서비스 매뉴얼 (20 페이지)

Sharp AR-5320 소프트웨어 설정 매뉴얼

CONFIGURING THE PRINTER DRIVER

After installing the printer driver, you must configure the printer driver settings appropriately for the number of paper
trays on the machine and the size of paper loaded in each.
1
Click the "start" button, click "Control
Panel", click "Printers and Other
Hardware", and then click "Printers
and Faxes".
In operating systems other than Windows XP, click the
"Start" button, select "Settings", and then click "Printers".
2
Click the "SHARP AR-XXXX" printer
driver icon and select "Properties"
from the "File" menu.
If you are using Windows NT 4.0/2000/XP, go to
step 4.
3
In Windows 95/98/Me, click the
"Setup" tab.
4
Click the "Configuration" tab.
Set the printer configuration properly. If not,
printing may not take place correctly.
5
Click the "Set Tray Status" button and
select the size of paper that is loaded
in each tray.
Select a tray in the "Paper source" menu, and
select the size of paper loaded in that tray from the
"Setting Paper Size" menu. Repeat for each tray.
Be sure to configure the above "Set Tray
Caution
Status" settings, and then when printing
specify a tray other than "Auto Select" in
"Paper Source" in the "Paper" tab of the
printer driver setup screen.
6
Click the "OK" button in the "Set Tray
Status" window.
7
Click the "OK" button in the printer
properties window.
9