Sharp AR-5420 운영 매뉴얼 - 페이지 16

{카테고리_이름} Sharp AR-5420에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-5420 44 페이지. Digital laser copier

This chapter explains basic and other copying functions.

The unit is equipped with a one-page memory buffer. This memory allows the unit to

scan an original once only and make up to 99 copies. This feature improves

workflow, reduces operation noise from the copier, and provides higher reliability by

reducing wear and tear on the scanning mechanism.

If the unit does not function properly during use, or if a function cannot

be used, see "TROUBLESHOOTING THE UNIT" (p.27).

1 Make sure that paper has been loaded in the paper tray (p.8),

or multi-bypass tray (p.10) and check the paper size (p.7).

If paper is not loaded, see page 8.

2 Turn on the unit (p.13).

3 Place the original.

When using the original table, see "ORIGINAL PLACEMENT" (p.15).

When copying onto A4 paper or a large size, pull out the paper output tray

extension.

4 Select the copy settings.

If you wish to copy using the initial settings (p.14), proceed to the next

step.

To set the number of copies, see page 16.

To adjust the resolution and contrast settings, see page 16.

To enlarge or reduce the copy, see page 18.

To change the tray, see page 18.

5 Start copying.

Press the start (

MAKING COPIES

) key.