Sharp AR-5420 운영 매뉴얼 - 페이지 20
{카테고리_이름} Sharp AR-5420에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-5420 44 페이지. Digital laser copier
페이지 인쇄
SET THE COPY QUANTITY
Set the number of copies using the two copy quantity (
from the original table.
• Press the clear (
• A single copy can be made with the initial setting, i.e., when "0" is
• Press the right copy quantity key to set the unit digit
from 0 to 9. This key will not change the tens digit.
• Press the left copy quantity key to set the tens digit
from 1 to 9.
EXPOSURE ADJUSTMENT/PHOTO COPYING
Exposure adjustment
Copy density adjustment is not required for most originals in the automatic exposure
mode. To adjust the copy density manually or to copy photographs, the exposure
level can be adjusted in 2 steps manually.
The copy resolution used for AUTO and MANUAL (
changed. (p.20)
1
Press the exposure mode selector key to
select the MANUAL (
PHOTO (
2
Use the light (
adjust the exposure level. If exposure level
2 is selected, the two left-handmost
indicators for that level will light up
simultaneously. Also, if level 4 is selected,
the two right-handmost indicators for that
level will light up simultaneously.
16
displayed.
) mode.
) and dark (
) key to clear an entry if a mistake is made.
) mode or
) keys to
,
) keys when copying
A4
B5
A5
Tens digit
Unit digit
) mode can be