Sharp AR-5516D 수동 시작 - 페이지 16

{카테고리_이름} Sharp AR-5516D에 대한 수동 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-5516D 32 페이지. Digital multifunctional system

SETUP

Install all of the software

If you have not set the IP Address yet, go to "Set the IP

Address" (p.12).

Perform step 4 through 7 in "Set the IP

Address" (p.12).

Click the "Standard" button.

The printer or printers connected to

the network will be detected. Click the

printer to be configured (the machine)

and click the "Next" button.

If the machine's IP address cannot be found,

make sure the machine is powered on, make

Note

sure the network cable is connected correctly,

and then click the "Search" button.

In the window for setting the

destination print port name, make

sure that ":lp" appears at the end of

the IP address and click the "Next"

button.

Any name can be entered in "Printer Port

Note

Name" (maximum of 63 characters).

A window appears to let you check

your entries. Make sure that the

entries are correct and then click the

"Finish" button.

If any of the entries are incorrect, click the "Back"

button to return to the appropriate window and

correct the entry.