Sharp AR-800 imager 브로셔 및 사양 - 페이지 8
{카테고리_이름} Sharp AR-800 imager에 대한 브로셔 및 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-800 imager 8 페이지. Digital copier
Sharp AR-800 imager에 대해서도 마찬가지입니다: 서비스 매뉴얼 (25 페이지)
G E N E R A L S P E C I F I C A T I O N S
Type:
Console
Copy System:
4-beam Laser Electronic
Originals:
Sheets, bound document, photographs
Original Size:
Max. 11" x 17"
Copy Sizes:
Max. 11" x 17"; Min. 5.5" x 8.5"
Copying Speed:
80 ppm (8.5" x 11" at 100% ratio)
61 ppm (letter-R)
52 ppm (legal)
43 ppm (ledger)
Continuous Copy:
Max. 999
Copy Ratio:
25%-400% in 1% increments
Fixed Presets: 25%, 50%, 64%, 78%, 95%,
100%, 121%, 129%, 141%, 200%, 400%, 800%
Printing Resolution:
600 x 2400 dpi (with smoothing)
Gradation:
256 levels
Duplexing:
Standard
First Copy Time:
Approx. 3.6 seconds
Warm-Up Time:
Approx. 7 minutes
Original Feed System:
Reversing Automatic Document Feeder (RADF)
Hard Drive:
3.2 GB
Memory Size:
32 MB
Document Storage Capacity: 1,000 pages (letter-size)
Copy Paper Feed:
3,500-Sheet Adjustable Paper Cassettes
4,000-Sheet Large Capacity Feeder
100-Sheet "Smart" Bypass Tray (letter-size)
Fusing System:
Heat Rollers
Developer System:
Dry Developer
Exposure System:
Moving optical source, slit exposure (stationary
platen) with automatic exposure function
Light Source:
Halogen Lamp
Required Power Supply:
115 Volts, 60Hz, 20 Amp Dedicated
Power Consumption:
Maximum 2.0 kw
Dimensions:
36.3" x 29.2" x 43.7" (w x d x h)
Weight:
Approx. 550 lbs.
E M B E D D E D C O N T R O L L E R S P E C I F I C A T I O N S
PDL Support:
PCL5e/ + PCL XL, Postscript Level II Emulation
Memory:
16 MB Standard; 48 MB max.
CPU:
PowerPC 603e 200 MHz
Client Operating
Windows
System Support:
Macintosh
Network Operating
Netware
®
System Support:
95, 98, ME, 2000, NT 4.0, UNIX
Protocol Support:
IPX/SPX, TCP/IP , Ethertalk
I/O Interface:
10BaseT, 10Base5, 10Base2, 100BaseT
s p e c i f i c a t i o n s
3.1, 95, 98, 2000, NT 4.0,
®
UNIX
, HP/Sun, Solaris
®,
®
3.x, 4.x, 4.x (NDS) Windows
®
®
, LPR/LPD, SNMP
®
SHARP ELECTRONICS CORPORATION
Network Office Systems Group
Sharp Plaza, Mahwah, NJ 07430-2135
1-800-BE-SHARP
Print Resolution:
600 x 2400 dpi
Print Speed:
Equivalent to engine speed
Duty Cycle:
Equivalent to engine duty cycle
Paper Supply
3 x 500-Sheet Cassette, 4,000-Sheet LCT
Acceptable Paper Sizes:
Statement-R (5.5 x 8.5) to Ledger (11 x 17),
17-22 lbs; Manual feed from Stack Feed
Acceptable Paper:
Standard bond, overhead
Multiple Prints:
1-999
Page Orientation:
Portrait or landscape
Simplex/Duplex:
Simplex & Duplex Printing Control
Duplex Modes:
Short Edge Bind/Long Edge Bind
Finishing:
Sort/Staple, Sort & Saddle Stitch
(optional finisher required)
Paper Sources:
All available sources & Stack Feed
"Smart" Bypass
A R - F N 8 F I N I S H E R S P E C I F I C A T I O N S
Copy Paper Size:
Statement to Ledger
Thickness:
Non-staple: 16-41 lbs. (90 lb. index)
Staple: 17-22 lbs.
Stapling Function:
50 sheets
Power Requirements:
Supplied from copier
Dimensions:
28.2" x 23.7" x 39.9" (w x d x h)
Weight:
79 lbs
A R - F N 9 S A D D L E - S T I T C H F I N I S H E R S P E C I F I C AT I O N S
Copy Paper Size:
Statement to Ledger
Thickness:
Non-Staple: 16-41 lbs. (90 lb. index)
Staple: 17-22 lbs.
Stapling Function:
50 sheets
Stapling Function Saddle Stitch: 15 sheets
Copy Paper Size (Saddle Stitch): Letter, Ledger
Power Requirements:
Supplied from copier
Dimensions:
28.2" x 23.7" x 39.9" (w x d x h)
Weight:
122 lbs.
A R - P N 2 B H O L E P U N C H U N I T S P E C I F I C A T I O N S
Copy Paper Size:
Letter to Ledger
Thickness:
16-41 lbs. (90 lb. index)
Hole Punch Function:
2 or 3 hole punch capability
Power Requirements:
Supplied from copier
Design and specifications are subject to change without notice.
Sharp is a registered trademark of Sharp Corporation. All trademarks
and registered trademarks are owned by their respective holders.
As an E
SHARP has determined that this
product meets the E
w w w. s h a r p u s a . c o m
guidelines for energy efficiency.
"Smart" Bypass 16-41 lbs. (90 lb. index)
S
Partner,
®
NERGY
TAR
S
®
NERGY
TAR
CPD-3457