Sharp AR-AR-M355N 빠른 참조 매뉴얼 - 페이지 29

{카테고리_이름} Sharp AR-AR-M355N에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-AR-M355N 31 페이지. Digital multifunctional imager

Operation Panel

When the machine is booted by the diag mode, each operation is performed with the hard

keys of the scanner. The window display is made by the LCD panel. The keys used in the

diag mode are assigned as follows:

START key

Document filing key

FAX/Image send key

Job status key

Clear key

Troubleshooting "Result:NG"

If a "Result:NG" is displayed, check for the following possible causes.

Event: The Write Protect DIP switch setting is incorrect.

Action: Make sure that the Write Protect switch of the Controller PWB is not set to the

release side (down).

Note: Data cannot be written to the ROM if the Write Protect switch is not set to Release

(down). Set the DIP switch properly and retry updating.

Event: The FAX cable is not connected. (The FAX is NG.) Writing cannot occur.

Action: Connect the cable properly and retry writing.

Quick Reference Guide: AR-M355N/M455N

→

OK key

→

Up/Down select key

→

Up/Down select key

→

Menu key

→

BACK key

Operation Panel and Troubleshooting "Result:NG"